Prolongation of the life cycle of wooden structures due to the use of joints on aluminum connectors

Rimshin, Vladimir I.; Roshchina, Svetlana I. I.; Lesovik, Ruslan V.; Lukin, Mikhail V.; Lukinа, Аnastasia V.

doi:10.48309/ecc.2024.420065.1705

Articles in Press

Document Type : Original Research Article

Authors

¹ NRU Moscow State University of Civil Engineering, Moscow, Russia

² Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia

³ Belgorod State Technological University named after V.G. Shukhov, Belgorod, Russia

10.48309/ecc.2024.420065.1705

Abstract

Collapsible joint systems always have benefits in speed and ease of installation; consequently, they are in demand in modern construction. The present article aims to describe one of the possible types of connection based on aluminum connectors. It is attempted to determine the mechanical strength of the connection with different types of connectors. To meet the aim of the study, methods of numerical and full-scale experiments with the comparison of the obtained research results are utilized. Moreover, the experimental study was carried out on the test bench of the VlSU laboratory. It has been established that the destruction of the joint is plastic in nature and is expressed in the gradual pulling out of the angels from the body of the wood beams. The correlation between the increase in load and deformations in the numerical and laboratory experiments is close; the discrepancies are 7-11%. The potential destruction in the numerical experiment was recorded with the values of forces 17-23% higher than the experimental data, which is justified by the greater magnitude of the removal of the nails from the body of the wood. The use of connections on aluminum connectors increases the operational reliability of structures by increasing their life cycle.

Graphical Abstract

Keywords

Main Subjects

Applied Chemistry

References

[1] B. Ndiwe, P. Kah, F.M.N. Bayock, D.A. Uchechukwu, H. Onyeji, Numerical and experimental investigations of mechanical properties of AW 6005-T6 Aluminium alloy butt weld joint using GMAW process, Metallurgical and Materials Engineering, 2023, 29, 16-36.[Crossref], [Google Scholar], [Publisher]

[2] S. Maksymova, V. Voronov, P. Kovalchuk, A. Larionov, Structure and properties of graphite-molybdenum brazed Joints. Metallurgical and Materials Engineering, 2023, 29, 115-128. [Crossref], [Google Scholar], [Publisher]

[3] Y.A.D. Ladi, N.D. Lamso, M.N. Ado, D.G. Iro, Y. Guero, Restitution of fresh organic matter to the soil by woody plants in the fields of ANR in the Maradi region of central eastern Niger, International Journal of Sustainable Agricultural Research, 2023, 10, 42-51. [Google Scholar], [Publisher]

[4] E.A. Obidiebube, H. Okolie, C.C. Obasi, K.L. Ochuenwike, Effects of different rates of wood ash on the growth and yield of carrot (Daucus Carota) in Awka, South Eastern Nigeria, Current Research in Agricultural Sciences, 2022, 9, 13-21. [Crossref], [Google Scholar], [Publisher]

[5] S.T.R.O.I.A.N.O.V.S.K.Y.I, Dmytro, The study of welding requirements during construction and installation of seismic-resistant steel structures, Journal of Research in Science, Engineering and Technology, 2020, 8, 17-20. [Crossref], [Google Scholar], [Publisher]

[6] M. Yu, Q. Yu, M. Li, Joint Estimation for Battery Capacity and the State of Charge Based on Variable Time Scale, Iranian Journal of Chemistry and Chemical Engineering, 2021, 40, 1943-1959. [Google Scholar], [Publisher]

[7] A. Hafiz, T. Schumacher, A. Raad, A self-referencing non-destructive test method to detect damage in reinforced concrete bridge decks using nonlinear vibration response characteristics, Construction and Building Materials, 2022, 318, 125924. [Crossref], [Google Scholar], [Publisher]

[8] A. Tolstoy, A. Gridchin, E. Glagolev, R. Lesovik, N. Shapovalov, Efficient construction composites for construction in the North and the Arctic, International Conference Industrial and Civil Construction, Cham: Springer International Publishing, 2021, 15-22. [Crossref], [Google Scholar], [Publisher]

[9] O. Faroque, S. Hasan, K.R. Hossain, R.K. Sheikh, Fabrication and characterization of wood fiber reinforced polymer composites, Al-Bahir Journal for Engineering and Pure Sciences, 2023, 3, 1. [Crossref], [Google Scholar], [Publisher]

[10] R.V. Lesovik, M.S., Ageeva, A.A. Matyukhina, E.V. Fomina, On the issue of designing structures of composite binders, In International Scientific Conference on Innovations and Technologies in Construction, Cham: Springer International Publishingm 2020, 246-252 [Crossref], [Google Scholar], [Publisher]

[11] E. Mullen, Saving a 15th-century nave roof from structural collapse at the Abbey Church of St Mary and St Melor, Amesbury, Wiltshire, Journal of Building Survey, Appraisal & Valuation, 2023, 12, 6-24. [Google Scholar], [Publisher]

[12] O.V. Vaganova, N.E. Solovjeva, R.V. Lesovik, S.L. Lesovaya, Digital transformation of Russia’s agricultural sector, Utopía y praxis latinoamericana: revista internacional de filosofía iberoamericana y teoría social, 2020, 12, 397-406. [Google Scholar], [Publisher]

[13] H.C. Biscaia, C. Chastre, D. Cruz, A. Viegas, Prediction of the interfacial performance of CFRP laminates and old timber bonded joints with different strengthening techniques, Composites Part B: Engineering, 2017,108, 1-17 [Crossref], [Google Scholar], [Publisher]

[14] C. Málaga-Chuquitaype, J. Ilkanaev, November. Novel digitally-manufactured wooden beams for vibration reduction. In Structures , Elsevier, 2018, 16, 1-9 [Crossref], [Google Scholar], [Publisher]

[15] A.S. Gribanov, V.I. Rimshin, S.I. Roshchina, Experimental investigations of composite wooden beams with local wood modification. In IOP Conference Series: Materials Science and Engineering , IOP Publishing, 2019, 687, 033039 [Crossref], [Google Scholar], [Publisher]

[16] M. Sergeev, V. Rimshin, M. Lukin, N. Zdralovic, July. Multi-span composite beam, In IOP Conference Series: Materials Science and Engineering, 2020, 896, 012058. [Crossref], [Google Scholar], [Publisher]

[17] V.I. Rimshin, B.V. Labudin, V.I. Melekhov, A.O. Orlov, V.L. Kurbatov, Improvement of strength and stiffness of components of main struts with foundation in wooden frame buildings. ARPN Journal of Engineering and Applied Sciences, 2018, 13, 3851-3856. [Google Scholar], [Publisher]

[18] A.A. Koshcheev, S.I. Roshchina, A.Y. Naichuk, N.I. Vatin, The effect of eccentricity on the strength characteristics of glued rods made of steel cable reinforcement in solid wood. In IOP conference series: materials science and engineering, 2020, 896, 012059). IOP Publishing. [Crossref], [Pdf], [Publisher]

[19] S. Merkulov, V. Rimshin, E. Akimov, V. Kurbatov, S. Roschina, 2020, July. Regulatory support for the use of composite rod reinforcement in concrete structures, In IOP Conference Series: Materials Science and Engineering, 2020, 896, 012022. [Crossref], [Google Scholar], [Publisher]

[20] M. Lukin, V. Martynov, V. Rimshin, I. Aleksiievets, Reinforced concrete vertical structures under a gently sloping shell of double curvature under the influence of progressive collapse, In Proceedings of MPCPE 2021: Selected Papers, Cham: Springer International Publishing, 2022, 577-587. [Crossref], [Google Scholar], [Publisher]

[21]V.I. Rimshin, S.I. Roshchina, E.S. Ketsko, P.S. Truntov, I.S. Kuzina, Engineering calculations of acidifier retaining walls during water treatment facilities designing, In Proceedings of MPCPE 2021: Selected Papers , Cham: Springer International Publishing, 2022, 55-73 [Google Scholar], [Publisher]

[22] J. Zheng, M. Wang, T. Yao, Y. Tang, H. Liu, Dynamic mechanical strength prediction of BFRC based on stacking ensemble Learning and genetic algorithm optimization, Buildings, 2023,13, 1155. [Crossref], [Google Scholar], [Publisher]

[23] S. Yang, New carbon paradigm: applications of carbon composite materials in the building industry, In Proceedings of IASS Annual Symposia, International Association for Shell and Spatial Structures (IASS), 2023, 2023, 1-11. [Google Scholar], [Publisher]

[24] X.Z. Lu, J.F. Chen, L.P. Ye, J.G. Teng, J.M. Rotter, RC beams shear-strengthened with FRP: Stress distributions in the FRP reinforcement, Construction and Building Materials, 2009, 23, 1544-1554. [Crossref], [Google Scholar], [Publisher]

[25] I.R. Kliger, R. Haghani, M. Brunner, A.M. Harte, K.U. Schober, Wood-based beams strengthened with FRP laminates: improved performance with pre-stressed systems, European Journal of Wood and Wood Products, 2016, 74, 319-330. [Crossref], [Google Scholar], [Publisher]

[26] A. Wdowiak-Postulak, Strengthening of structural flexural glued laminated beams of ashlar with cords and carbon laminates. Materials, 2022,15, 8303. [Crossref], [Google Scholar], [Publisher]

[27] R.M. Gutkowski, J. Balogh, C. Rogers, R. SaRibeiro, Laboratory tests of deep composite wood-concrete beam and deck specimens. In Proceedings of the 4th Structural Specialty Conference of the Canadian Society of Civil Engineering, 2002, 1-9. [Google Scholar], [Publisher]

[28] M. Popova, M. Sergeev, A. Lukina, M. Shunqi, July. Strength and deformability of lightweight metal trusses with elements from cut I-beams. In IOP Conference Series: Materials Science and Engineering, 2020, 896, 012061. [Crossref], [Google Scholar], [Publisher]

Eurasian Chemical Communications

Prolongation of the life cycle of wooden structures due to the use of joints on aluminum connectors

References

References

Articles in Press, Accepted Manuscript
Available Online from 19 November 2023

Prolongation of the life cycle of wooden structures due to the use of joints on aluminum connectors

References

References

Articles in Press, Accepted Manuscript Available Online from 19 November 2023

Articles in Press, Accepted Manuscript
Available Online from 19 November 2023